Steradian Classic Series Скачать руководство пользователя страница 10

Страница: 10 / 17

Steradian Technologies, LLC

4. Press 2 Start Game

on keypad

A screen with 2 settings will appear, each to be configured
You will be next inputting the settings to our start the game

[Start Game] will appear next - configure each setting using keypad — —>

Team Mode:

Determines whether or not hits from your own teammates

are allowed

(to enter team number, see instructions under [Init Weapon])

1 = Teams

(cannot hit guns on same team)

2 = Free for All

(anybody can hit anybody - no teams)

Time:

In hours and minutes from 1:00 to 1:59 minutes. A time of 0:00 indicates no time limit

is to be used for the game.

B. Press # (Next)

on keypad to go to next screen

[Init Weapon] screen will appear, to enter settings using keypad — —>

Team:

Enter 1, 2, 3, or 4 as team number for each player. If playing

Free for All, enter Team:1 for everybody, as team numbers aren’t used
in Team Mode 2

Slot:

First aim Game Controller at player,

then enter A, B, C, or D (slot

set up earlier in instructions).

The Game Controller

will now program the gun

, as it sends an IR signal

to the player's weapon, after the slot letter is entered

1. Gun will sound a series of beeps, then play startup sounds

2. If gun does not program correctly as described above, press # on

this screen to resend the programming data— —>

3. When programmed correctly, press *

(Back)

to return to [Init Weapon]

screen to enter settings for next gun

4. Continue until all players are initialized

5. If 9v battery is low, data will not send to guns and just returns to [Main Menu] screen

5. Press 3 Referee

on keypad

[Referee] screen will appear next - choose any number using using keypad — —>
This mode allows control of game during play, by pointing at player and their gun,
then choosing the corresponding number for the following settings:

Kill:

Instantly kills the player

(take out a problematic player)

Heal:

Restores one hit to the player, if they are not dead

Reset:

Fully resets the player, restoring hits and ammunition to their

initial values

Ammo:

Adds one clip of ammunition to the player, up to a maximum of 9

Resurrect:

Brings a killed player back up to one hit. Does not affect ammunition left

6. Tips

for programming guns with Game Controller:

• Only 1 gun can be programmed at a time (6’ away) - all other players must be out of range of

Game Controller

• With player wearing Sunband, point Game Controller at player and send programming. Consistent

beeps must be heard from gun during programming. If beeps are inconsistent, gun did not receive
full programming - press the “#” key to resend the data

• If 2 or more guns are programmed at same time, each may appear ready, but programming is

likely corrupted

• If 9v battery is low, data will not send to guns and just returns to [Main Menu] screen
• If playing in cold weather, store Game Controller in warm place, for it doesn’t operate well with

cold battery

X-Series User Guide