Tech Support:
consumer.steppir.com/support | 425.453.1910 | [email protected]
9
Section 3:
Remove the two black plastic thumbscrews on the front and rear element, and insert a folded element fiber-
glass support into each side of the elements, as shown in
Figure 6.
The folded element fiberglass supports
are
not
symmetrical, please refer to
Figure 7
for the correct orientation.
Make sure each fiberglass support is fully seated within the element
Reinstall each plastic thumbscrew, fastening them against the fiberglass support tube.
Do not overtighten! Doing so may crush or otherwise damage the fiberglass support tube
SY3 SYSTEM ASSEMBLY: SY3 ANTENNA
Figure 6
