SSDK12M - SSDK16M - SSDK20M
13
Before any attempt to start the generator please follow these important guidelines.
Isolator key location
Open the main canopy door on the control panel side of the generator - Fig.5 & 6
Fig.6
Fig.5
To switch
OFF
the 12V battery supply, push down and turn the red key counter-clockwise to release .
It is recommended to check the oil level BEFORE EVERY START OPERATION - Ref. Fig.7 & 8.
Ensure the generator (engine) is on level ground to ensure the correct oil quantity is measured.
● Check the engine oil level before starting or more than 5 minutes after stopping the engine.
● Remove the oil level gauge, wipe it clean and reinstall it.
● Take the oil level gauge out again, and check the oil level.
There is the danger of burns as parts of the generator will become very hot during use. No part of the engine,
alternator or exhaust must be touched during or shortly after operation. Do not operate the generator unless
all guards are in place. There is a risk of burns or serious mechanical injury.
To switch
ON
the 12V battery supply, insert the red key and turn to lock into position.
The 12V battery supply has been fitted with a red "Battery Isolator Key". This is to isolate the 12V battery
from the engines 12V DC system when not in use, transportation and when working on repairs/servicing
safely.
Pre-start Checks
Check Oil Level - How To
Hot Parts
STEPHILL GENERATORS LTD STRESS THAT THE ULTIMATE RESPONSIBILTY FOR THE
SAFE USE OF THE GENERATOR RESTS WITH THE USER.
Operating Instructions
Check Battery Isolator Key - Location