SVW909 Sip Wifi phone User Manual
www.stephen-tele.com
WLAN and VOIP Setting
This product support IEEE802.11b/g and SIP protocol, the default setting is without SIP information. In order to
configure the phone, you should obtain Sip account information from your ITSP beforehand.
Example 1 --- Wifi Network Configuration:
SSID: WIFIAP
Security type: WEP-open
Password/Text: WIFI ( or Hex key: 1016A386E)
Example 2 --- Sip Account Configuration:
SIP server
（
domain
）
: 51.108.26.31 (or maybe in the form of : sip.stephen-tele.com)
User name (SIP phone number):123456
SIP phone number: 123456 (phone number could be the same to user name, depends on your server. )
Password: 1234
A: Search Available WLAN
1 At standby mode, press the right soft key or OK key to enter the main menu.
2 Select
4 setting>2 WLAN setting>2 WLAN search
, press right soft key or OK key to start WLAN searching.
3 After searching, there will be a list to show you the available APs, with security type and signal strength. Select the
one with highest Signal strength (if this AP is permitted to use), press right soft key or OK key to setting.
Note:
The security type of the selected AP is shown on the AP list. You may use WEP-OPEN type or any others by
following the indication
B: Connect WLAN
1. Set the
SSID
name first, (the default name is the one you have just selected
，
the name is consistent to AP
currently), press right soft key or OK key to enter
change
menu.
2. Select
2 security type>2 WEP-OPEN
〉
〉
〉
〉
1 WEP Key index
〉
〉
〉
〉
1 WEP Key 1,
press right soft key or OK key and enter the
WEP-OPEN
menu again. If the security type is “Open”, go to Step 4 directly.
3. Select
2 key / pass
〉
〉
〉
〉
1 passphrase/2 hex Key,
press right soft key or OK key enter the
enter key
（
（
（
（
hex
）
）
）
）
mode, key of
the SSID is the one of the AP you have just selected., then press the right soft key or OK key enter
change
menu
again.
or
