SVW909 Sip Wifi phone User Manual
www.stephen-tele.com
4. Select
3 IP setting>1 use DHCP
(If the WLAN you selected support DHCP server), press right soft key or OK key to
enter
change
menu again. You can also select
static IP
, follow the indications, enter the IP address, net mask
、
gateway, DNS address in turn. And back to
change
menu after the setup.
5. Select
4 save and use
, press right soft key or OK key to enter the
save and use
menu.
6. Select
1 do not use
, press right soft key or OK key enter
WLAN Setting
menu again, finish
WLAN setting.
C: SIP Server Registration
1.Wifi phone number setting
You should obtain Sip account information from your ITSP before you configure the phone.
Select
3 VOIP setting> change> VOIP identify> SIP number,
press right soft key or OK key , input SIP phone number,
press right soft key or OK key and enter the
VOIP change
menu again.
2
.
SIP domain setting
Select
3 VOIP setting> change> VOIP identify> SIP domain,
press right soft key or OK key ,input SIP server address,
press right soft key or OK key and enter the
VOIP change
menu again.
or
3.SIP server authentification
Select
VOIP authentification>SIP user name/ password
, then press right soft key or OK key and enter the
VOIP
change
menu.
and
4.SIP Server Setting
Select
VOIP server> SIP server address/SIP proxy address
, press right soft key or OK key and enter the
VOIP change
menu.
or
Note:
1.
Regularly your Sip Server will support STUN, and you don’t need to set stun in your handset to register to a Sip
server. But if your server doesn’t support STUN, you can find some open STUN resource through the internet,
and configure it to the handset.
2.
The default port of the SVW909 is 5060, If you want to change it, you can add a”
: “
after your sip server address,
and add the port number after the “
:
”
