Stenograph WAVE, Руководство пользователя

Страница: 45 / 82

45
Chapter 4: Writing on the Wave
© 2017 Stenograph
Memory
The Wave uses Memory to store steno notes and timestamp files. Steno note files stored in Memory
remain even when you turn the Wave Off. There is 12,000 strokes of Memory on the Wave or
approximately 50 pages. If the Memory becomes full while writing realtime, the realtime display on the
Wave stops scrolling; however, the Wave continues to send steno notes to the CAT system.
View Memory Files
The Memory screen displays the list of files in a year, month, date and time format: 20090716 - 142341
(July 16, 2009 2:23:41 p.m.). By default, the newest file is listed first. The file size and the estimated
number of transcript pages shows for each file.
Timestamp files are part of the steno note file. They are not visible in the list.
To view Memory files:
1. From the Opening menu, press Memory .
2. Steno note files display with the newest folder first. Use Date Sort to toggle files between ascending
and descending order.
3. Press the Up and Down buttons to move to the desired folder and press Folder .
4. A list of files contained in the folder displays with the newest folder first. Use the Up and Down button
and Date Sort to view the files.
5. To return to the first Memory screen, press Back .
6. To return to the Opening menu press Quit .
Read Steno Notes from Memory
You can read steno notes from Memory into your CAT software via USB cable or USB virtual serial port
connection. The Memory screen displays the list of files in a year, month, date and time format:
20090716 - 142341 (July 16, 2009 2:23:41 p.m.). By default, the newest file is listed first. The file size
and the estimated number of transcript pages shows for each file. Timestamp files are part of the steno
note file. They are not visible in the list.
USB Cable Connection
To use a USB cable for reading steno notes, you must be using USB compatible software, such as
Case CATalyst V4.096 and higher; have CAT software that supports the reading of steno notes from a
Stentura; and have installed the Wave USB driver on your computer. See
Installing the USB Drivers on
page 63 for instructions on loading the driver.
To read steno notes via USB cable:
1. Turn your computer and Wave On . Allow your computer to boot completely.
2. Each end of the USB cable has a different connection plug. Insert the appropriate end of the USB
cable into the USB port on the back of the Wave and the other end into a USB port on the computer.