Stenograph elan Cybra, Руководство пользователя

Страница: 35 / 68

35
Chapter 4: Using Your élan Cybra
5. After successfully reading your steno notes, you may want to
clear the notes from the élan Cybra memory. See
“Clearing the Memory” in this chapter for more information.
Serial Cable
You must use the élan Cybra Realtime Cable kit (P/N:35856) to
read steno notes via serial cable. You can use a serial cable with
Case CATalyst or other CAT software that has interface capabilities
with the Stentura or SmartWriter writing machines.
To connect the serial cable:
1. Be sure your the élan Cybra and computer are turned Off .
2. Connect the purple 9-pin male end of the serial realtime cable to
the COM port on the back of the writer and the black 9-pin
female end to COM port of the computer. Be sure the gray cable
is plugged into the adapters.
3. Turn your élan Cybra On .
4. Turn your computer On and start your Read program. Refer to
your CAT software manual for instructions on reading steno
notes.
In Case CATalyst, select the following Read options:
a. Device - élan
b. Method - Direct (cable)
5. After successfully reading your steno notes, you may want to
clear the notes from the élan Cybra memory. See “Clearing the
Memory” in this chapter for more information.