Stenhoj MAJOR 4000, Инструкция по эксплуатации и обслуживанию

Страница: 20 / 53

T61754
Revision:
19
STENHØJ MAJOR
CLEANING
Cleaning of 4-post surface mounted lifts to prevent corrosion damages.
Corrosive fluids as brake fluid, oil, fuel or other solvents must be wiped off immediately, otherwise damage
will occur to the coating.
Special attention must be paid to the corrosive effect of salt in fall and winter periods.
The cleansing agents must not have any abrasive effect, nor contain solvents.
The lift must be cleaned at least once a week.
The lift must be cleaned with a non-corrosive cleansing agent.
Clean and wipe the lift according to the following scheme:
When: Where: How: Remarks:
Every week
Platforms
Clean and wipe
Wearing surfaces must be
slightly oiled
Drive-on ramps
Post / base plate
Cross beams
Stenhøj A/S does not accept any claim concerning the paint peeling off or corrosion damages caused by
missing or insufficient cleaning or maintenance.
Repair of damages:
Repair of damages on the coating must be carried out immediately in order to minimize the extent of the
repair.
The damages will typically be:
1. Damages which do not affect the metal surface but affects the coating itself
2. Damages going down into the metal surface.
Repairs:
Contact Stenhøj A/S for guidance.
Please state RAL number of paint.