INSS0711
Security mode
It is possible to impose a maximum temperature set point by
activating this mode. Then, it becomes impossible to exceed
this set point, regardless of the current mode. However, it is
still possible to lower the set point at your discretion.
Procedures to activate the Security mode
1. To activate the Security mode, from the Day mode adjust
the day set point to the desired maximum temperature.
2. From the Day mode, simultaneously press down the (+) and
(-) buttons for more than 13 seconds (note that the SET
icon will blink after 3 seconds, but hold down both button
or you will find yourself in the degree adjustment mode or
in Fan mode).
3. The
icon will appear after 13 seconds, indicating that
the Security mode is activated. Release the buttons.
Procedures to deactivate the Security mode
1. To deactivate the Security mode, start by cutting thermostat
power at circuit breaker and wait at least 20 seconds.
2. Turn thermostat power back on and the icon will blink
for a maximum of 5 minutes, indicating that it is possible to
deactivate the Security mode.
3. Simultaneously press down the (+) and (-) buttons for more
than 13 seconds. (Note that the SET icon will blink after
3 seconds, it is important to hold down the two buttons
to avoid switching to the adjustment or Fan mode). After
13 seconds, the icon will disappear, indicating that the
Security mode is deactivated. Release the buttons.
