6
INSSIRHC402-1_0720
Power mode ( )
In Power mode, the power symbol will be
displayed and the mode in use indicator arrow
(
) will point to the three figures at the top of the
digital screen. These three figures display the
power level (expressed as a percentage).
Power mode with inactive timer
When the timer is inactive (0H and 00MIN), the
three figures at the top of the digital screen will
indicate the power level of the lamp. The letters
H and MIN, and the clock icon will continue to
be displayed at the bottom of the screen, but the
figures will be not be displayed. When the power
level is at 0%, the dimmer will turn the lamp off.
“---” will be displayed on the three-figure display
at the top of the screen.
Principal features of the timer
Frequency: 50/60Hz
Operation
Phase control at startup controls the inrush
current and preheats the lamp. The duration of
this operation will not exceed 14 seconds. During
this operation, the Power mode and Timer mode
icons will be displayed, either as a fixed display or
as blinking icons.
Adjusting the power and the timer
The “+” and “-” buttons let you adjust the power of
the lamp in Power mode and the duration of time
in Timer mode. Power can be adjusted in units of
10% (from 0% to 100%), and the timer can be
adjusted in units of 15 minutes (0H00MIN to
9H45MIN). To set the power or the timer, the
dimmer must be set to the corresponding mode,
meaning that the mode in use indicator arrow ( )
must point toward the mode in use. Adjustments
can be made in units of 10% (Power mode) or in
units of 15 minutes (Timer mode) by pressing the
“+”or “-” buttons successively. To scroll through
the settings, press and hold either the “+”or “-”
button.
Switching between the Power mode and
Timer mode
To switch from one mode to the other, press the
two buttons simultaneously and release them
within three seconds.
The mode in use indicator arrow ( ) will be
displayed next to the mode currently in use.