background image

7

Eyepieces

:

While the telescope’s light-gathering power depends on the size of the telescope’s 

objective lens, its magnification power depends on the eyepiece used. In order to see objects clearly

at the proper magnification power, we recommend having four or more eyepieces. 

1. Low-power, wide-field eyepiece

:

You need a low-power, wide-angle eyepiece to more easily 

locate objects in the sky and to observe extended objects like the Andromeda galaxy. Our best wide

field eyepiece is the Stellarvue Optimus 20. 

2. Medium-power eyepieces

:

Boosting the power darkens the sky background and shows more detail in deep

sky objects such as nebulae, star clusters and galaxies. We recommed the Stellarvue Optimus 9 and 13.5 

eyepieces as the best for medium-power deep sky viewing. 

3. Two High-power eyepieces

:

Viewing planets, close double stars, and small craters on the moon requires a

high-power eyepiece. We recommend having two high-power eyepieces because the atmospheric seeing con-

ditions cannot always support the highest power. Having two high-power eyepieces of different focal lengths

will allow you to adjust the magnification based on the seeing conditions. We recommend the Optimus 3.6 and

4.7 eyepieces. 

The amount of magnification is determined by dividing the focal length of

the telescope by the focal length of the eyepiece. The SVX130T has a 910

mm focal length. A 20 mm eyepiece, when used with this telescope, will

provide a magnification of 45.5 power (910 mm/20 mm). This means ob-

jects appear 45.5 times closer. The smaller the focal length of the eye-

piece, the higher the power becomes. So our 4.7 mm eyepiece provides

194 power (910mm/4.7mm).

The ability of a telescope to magnify is limited by:

A. The accuracy of the optics

B. The steadiness of the atmosphere 

Under perfect conditions the SVX130T is capable of magnifying

objects 30 - 500 times. Unfortunately, the air is often unsteady

due to air turbulence. This causes the stars to twinkle and limits

the ability of any telescope to show fine details. Adding more

power only increases the size of the burry image. This is referred

to as “empty magnification” since it is too high of a power for the 

conditions and actually shows you less. Under turbulent condi-

tions, it is best to use a lower magnification eyepiece.  

If you purchased the entire set of Optimus eyepieces you may

notice that on a given night the planetary views through the 3.6

mm eyepiece may be soft. This indicates that the seeing condi-

tions are not optimal, so it is wise to switch to the 4.7 mm eye-

piece. The image will be smaller but sharper. 

Stellarvue optics are extremely accurate. If details are soft when

you observe through it, you either did not let the optics cool down

enough or you are observing under less than favorable condi-

tions. Be patient. On a steady night you will see magnificent de-

tail. 

Magnification is not as important on larger extended objects.

Many amateur astronomers switch from planets to star clusters

and nebulae when the air is unsteady.    

Jupiter appears sharp under steady skies and its

moons appear as disks.

Unsteady air distorts the moons 

and Jupiter is soft with little detail

OPTIMUS EYEPIECES

Содержание SVX130T PREMIER





















Отзывы: