stellar labs TireMan 12154, Руководство пользователя

Страница: 19 / 40

Stellar
®
TMP12154 Owner’s Manual | Page 15
Main Decal Placement - PN 98664 (MODIFIED)
WARNING
Crush Hazard
Keep clear of stabilizer legs during operation.
Failure to keep clear of moving
stabilizer legs can result in death or
serious injury.
C4795 - Rev B
NOTICE
16973
Use only Stellar® a pproved lifting devices and/or atta
chements.
NOTICE
9188 - Rev C
Damage may occur if worm gear or bearings run dry. Refer to the equipment
manual for proper lubrication instructions.
Proudly Designed
and Manufactured in the USA by
WARNING
Crush Hazard
Keep clear of stabilizer legs during
operation.
Failure to keep clear of moving
stabilizer legs can result in death or
serious injury. C4795 - Rev B
UP
AUX DOWN
OR
SS OUT
IN
SS
OR DOWN
UP
OR
CS OUT
IN
OR
CS DOWN
UP
INNER CYL
BASE
INNER CYL
ROD
SHORT LINK
BOTTOM
LONG LINK
BACK
INNER/MAST
PIN
EXT CY O L UTER CYL ROD INNER/OUTER PIN OUTER CYL BASE SHORT LINK TOP
36248
OFF
ON
Flood
MANUAL
REMOTE
OFF
Light
Speed Control
CIRCUIT
OFF
ON
ON
OFF
TOOL
TOOL CIRCUIT MUST BE OFF
TO OPERATE AUX OUTRIGGERS
PN 16620
USE MANUAL CONTROLS ONLY IN CASE OF RADIO CONTROL FAILURE. ACTIVATE WITH MANUAL OVERRIDE SWITCH.
Down
Up
INNER
In Down
Out Up
EXTENSION ROTATION Tireman
Rotation Tireman
Pad Spin OUTER
Open
Close
Tireman
Clamp
PN 43469
CS OUTRIGGER CS OUTRIGGER AUXILIARY/ TOOL CIRCUIT SS OUTRIGGER SS OUTRIGGER
OUT
IN
OUT
IN
DOWN
UP
DOWN
UP
DOWN
UP
PN 43470
NOTICE
16973 Use only S tellar ® approved
lifting
devices an d/or attach
ements.
Check Monthly
Check Gearbox Oil Level
and fill as needed.
(SAE 80/90 WT) 22619
FOR SERVICE ON THIS EQUIPMENT
CONTACT: STELLAR INDUSTRIES, INC.
190 STATE STREET, GARNER, IA 50438 641-923-3741
800-321-3741
4214
Proudly Designed and Manufactured
in the USA by
NOTICE
98573
This tire manipulator has been designed and
manufactured to ASME/ANSI B30.22
and/or B30.5 specifications.
Do not handle tires filled with ballast.
Do not drag the tire. the unit is designed to lift and position.
Do not clamp an uninflated tire and then inflate. Do not use the outer cylinder to push objects.
Do not use the unit for any jacking, pulling, or dragging involving an object or another vehicle.
Do not use one arm to break beads.
Do not use one arm to sling a load.
98578
Read and understand all manuals and safety signs before operating or servicing this
equipment.
Untrained Operator Hazard
Misuse Hazard
Misuse Hazard Misuse Hazard
Misuse Hazard Misuse Hazard
Misuse Hazard Misuse Hazard
Keep non-essential persons clear of tire manipulator during operation.
Crush Hazard
DANGER
Death or serious injury will result from touching tethered remote if tire manipulator,
load, or vehicle becomes electrically charged.
Maintain safe clearance from high voltage
power sources.
Electrocution Hazard Electrocution Hazard
WARNING
Death or serious injury will result from inadequate clearance if tire manipulator, load,
or vehicle becomes electrically charged.
• Maintain safe clearance from high voltage
power sources.
• Never approach vehicle or load if equipment
is near a high voltage power source.
Keep clear of tire manipulator during operation.
Failure to keep clear of moving tire manipulator
can result in death or serious injury.
Crush Hazard
Do not handle tires filled with ballast.
Do not drag the tire. the unit is designed to lift and position.
Do not clamp an uninflated tire and then inflate. Do not use the outer cylinder to push objects.
Do not use the unit for any jacking, pulling, or dragging involving an object or another vehicle.
Do not use one arm to break beads.
Do not use one arm to sling a load.
98578
Read and understand all manuals and safety signs before operating or servicing this
equipment.
Untrained Operator Hazard
Misuse Hazard
Misuse Hazard Misuse Hazard
Misuse Hazard Misuse Hazard
Misuse Hazard Misuse Hazard
Keep non-essential persons clear of
tire manipulator during operation.
Crush Hazard
DANGER
Death or serious injury will result from
touching tethered remote if tire manipulator, load, or vehicle becomes electrically charged.
Maintain safe clearance from high voltage
power sources.
Electrocution Hazard Electrocution Hazard
WARNING
Death or serious injury will result from
inadequate clearance if tire manipulator, load, or vehicle becomes electrically charged.
• Maintain safe clearance from high voltage
power sources.
• Never approach vehicle or load if equipment
is near a high voltage power source.
Keep clear of tire manipulator during operation.
Failure to keep clear of moving tire manipulator
can result in death or serious injury.
Crush Hazard
16
13
12
14
15
17
18
19
01
02
03
04
07
05
06
04
02
18
19
TIRE SERVICE DECAL KIT
PN 98664 (MODIFIED)
DECALS IN BOLD ARE NOT SHOWN - PLACE ON BODY
06
Serial
Tag
Location
TMP16160 Decal Kit - PN 98664
Item No. PN Description Location QTY
01
98573 DECAL ASME/ANSI B30.22/B30.5 TIRE MAN Main Base 1
02
C4795 DECAL DANGER FOOT Stabilizers - CS & SS 2
03
73929 DECAL RADIO PRESSURE WASHER NOTICE Main Base 1
04
16973 DECAL USE STELLAR APPROVED ATTACHMT Main Boom - Both Sides 2
05
9188 DECAL WORM GEAR LUBRICATION Main Base 1
06
35234 MADE IN THE USA - STELLAR Mast - Both Sides 2
07 4214 DECAL CONTACT STELLAR
Main Base
1
08
98655 DECAL DANGER ELECTROCUTION TIRE MAN Four Corners of the Body 4
09
C5910 DECAL STELLAR LOGO 4.00X9.50 PRE-MASKED Body - Optional 3
10
-
11
16657 CONTROL HANDLE DECAL
ID DECAL APPLIED FROM TM KIT
Main Base
1
12
36248 DECAL SWITCH PANEL
Main Base - CS
1
13
16620 DECAL SWITCH PLATE
Main Base
1
14
43469 DECAL VB CONTROL
Main Base
1
15
43470 DECAL OUTRIGGERS
Main Base
1
16
22619 DECAL CHECK GEARBOX
Main Base - CS
1
17
47404 DECAL COUPLERS TM
Main Boom
1
18
98578 DECAL WARNING PLACARD
Stabilizers CS & SS
2
19
54589 DECAL STELLAR LOGO 8X22.25 PRE-MASKED
Main Boom - Both Sides
2
10
10