Juice Extractor
Page 4
How to use
1. Place the Juice Extractor on a flat, stable
surface. Ensure that there is at least 10cm
clearance on all sides.
2. Ensure that the
Speed Control
is set
to the Off (0) position before plugging
the
Mains Plug
into a mains socket
and switching on. The outer ring of the
Speed Control
will illuminate.
3. With the
Ingredient Pusher
removed
add your first ingredients into the
Feeder
Tube
.
4. Set the
Speed Control
to either
position “1” (slower) or position “2”
(faster) depending on your choice of
ingredients (see Speed Selector Table
opposite).
5. Gently but firmly push the
Ingredient
Pusher
to the bottom.
6. Continue to gradually add ingredients
into the
Feeder Tube
and using the
Ingredient Pusher
until you have the
amount of juice desired.
7. When you have finished Juicing, set
the
Speed Control
to the “0” (off)
position and disconnect the
Mains Plug
from the mains socket.
■
Do not operate the Juice Extractor
continuously more than 4 minutes to
avoid overheating. After each use, allow
the Extractor to cool for 15 minutes
■
Empty the
Pulp Separator
regularly
during use.
■
Do not attempt to raise the
Safety
Locking Arms
whilst the mixer
is running. Doing so will cause the
extractor to stop automatically, and you
must set the speed control to ”0” before
re-starting.
Hints
■
The best results are obtained when using
young and particularly fresh vegetables
and fruits. In general, the softer the
vegetable and riper the fruit, the thicker
and less clear the juice will be.
■
Wash fruits and vegetables and dry them
well.
■
Roll leafy vegetables into clumps.
■
When making a mixed drink from more
than one ingredient, use the softer
ingredients first, then the harder ones.
■
Vitamins disappear quickly after
extraction of the juice, which should
therefore be consumed as soon as
possible.
■
Apple juice turns brown rapidly. A few
drops of lemon juice will keep it from
turning brown too quickly.
■
Some residue pulp can be used as a base
for soups, sauces, jams, and desserts.
Cleaning
1. Wash all items except the
Extractor
Body
in a solution of liquid detergent
and warm water then rinse and dry
thoroughly.
■
All the items except the
Extractor Body
can also be cleaned in a dishwasher.
2. Wipe to clean the
Extractor Body
using a cloth, slightly dampened with
liquid detergent and warm water. Dry
thoroughly.
■
DO NOT IMMERSE ANY PART OF
THE EXTRACTOR BODY IN
WATER.
■
Do not use harsh abrasive cleaners, steel
wool scourers or metal implements.
