Juice Extractor
Page 3
Before first use
1. Remove any labels and/or
swingtickets.
2. Clean all parts, following the
instructions for cleaning.
Assembly
■
Confirm that the Extractor is
switched OFF and not plugged in
during assembly.
Follow the steps below:
1. Fit the
Pulp Separator
to the
Extractor Body
(Fig.1)
ensuring
that the spout matches with the
notch on the right hand side of the
body.
2. Fit the
Filter Basket
into the
Pulp Separator
(Fig.2)
matching
the notches on the underside with
the holes on the
Filter Drive
.
■
Take care when handling the Grater/
Strainer, as the grater is sharp.
3. Fit the
Extractor Cover
on top
of the
Pulp Separator
. then raise
the
Safety Locking Arms
(Fig.3)
and locate into the two grooves
either side of the
Extractor Cover
.
Press down at the base of each
arm to lock into place
(Fig.4)
.
■
For safety the Juice Extractor will
not function until both
Safety
Locking Arms
are locked into
position.
4. If using the
Ingredient Pusher
, fit
it into the
Feeder Tube
locating
one of the long grooves in the
Ingredient Pusher over the lug inside
the Feeder Tube.
5. Fit the
Foam Separator
into the
Jug
as shown
(Fig.5)
and position
the Jug so that the
Extractor Spout
is inside the wide Jug spout.
Speed Selector Table
Position 1 (Slower)
Blackcurrants
Blueberries
Broccoli
Cauliflower
Cherries (Stone Removed)
Cucumbers
Garlic
Gooseberries
Grapefruit (Peeled)
Grapes (Seedless)
Kiwi Fruit (Peeled)
Lemons (Peeled)
Mango (Peeled, Stone Removed)
Onion
Oranges (Peeled)
Parsley
Peaches (Stone Removed)
Pears (Ripe)
Plums (Stone Removed)
Raspberries
Strawberries
Tomatoes
Watermelon (Peeled)
Position 2 (Faster)
Apples
Beetroot
Brussels Sprouts
Cabbage
Carrots
Celery
Fennel
Pears (Harder)
Peppers
Pineapple (Peeled)
Root Vegetables (Other)
Spinach
Not suitable for juicing
Fruits/vegetables that are rich in
starch are not suitable for use
with this extractor, including:
Avocado
Bananas
Coconut
Figs
Papaya
(Fig.1)
(Fig.2)
(Fig.3)
(Fig.4)
