stellar labs Flex36 108-12, Руководство пользователя

Страница: 25 / 68

19
Every hooklift installation is unique. However, certain guidelines exist that apply to every
model. Listed below is a general set of chronological steps that may be followed when
installing a Stellar Hooklift. If any questions arise during the installation process, feel free to
contact your local dealer or Stellar Customer Service at 800-321-3741.
Installation 19
Chapter 6 - Installation
Basic Installation Overview
1. Clear the truck frame.
2. Set the Flex on the truck frame.
3. Shorten the truck frame to within 2” from the rear of the loader.
4. Install bumper.
5. Install tie down channels. (See corresponding Mounting Kit Drawing in this chapter)
6. Install tarper tower (If applicable).
7. Install cab and PTO controls.
8. Mount hydraulic reservoir tank and valve bank.
9. Mount PTO and Pump.
10.Run hydraulic hoses.
11.Connect suction and pressure to the reservoir tank and valve bank.
12.Install mud flaps and fenders.
13.Run Flex.
Chapter Contents
Basic Installation Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Installation Steps - Basic Guidelines . . . . . . . . . . . . . . . . . . . . . . . .20
Mounting Kit (Model 60-8) - PN 33320 . . . . . . . . . . . . . . . . . . . . . .22
Mounting Kit (Models 84-10, 108-12, 120-14) - PN 23700 . . . . . . .23
Rotary Valve (All Models) - PN 37741 . . . . . . . . . . . . . . . . . . . . . . .24
Reservoir Assembly - PN 35883 . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Setting System Relief Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . .26-27
Installation Instructions for the Power Beyond VDM8 Valve . . . .28
Port Side Relief Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Controller Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Dump Light Kit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Hydraulic Schematic (Model 60-8) - PN 34616 . . . . . . . . . . . . . . .32
Hydraulic Schematic (Model 84-10)- PN 34617 . . . . . . . . . . . . . .33
Hydraulic Schematic (Model 108-12) - PN 34618 . . . . . . . . . . . . .34
Hydraulic Schematic (Model 120-14)- PN 34619 . . . . . . . . . . . . .35
Subframe Model 60-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Subframe Model 84-10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Subframe Model 108-12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Subframe Model 120-14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39