4
5)
9V Battery Cover
Unscrew the thumbscrew in an anti-clockwise direction. Use good quality Alkaline 9V PP3 cell batteries for long
operational life. If using the DI box with phantom power the battery circuit will automatically switch off.
6)
PAD (Attenuation)
When using the DI box with line level sources it may often be necessary to reduce the input gain – the switchable
PAD provides 20dB of attenuation. Move the switch to the down position to activate the PAD. The PAD should only be
used when the DI-50 distorts internally, if the distortion is generated within the mixing console the input gain on the
console should be adjusted.
7)
Signal Input
Unbalanced 6.35mm (¼”) mono jack socket suitable for use with instruments, keyboards or line level sources.
Connections should be wired TIP = Positive and RING = NEGATIVE
8)
Signal Input
Unbalanced XLR socket suitable for use with instruments, keyboards or line level sources. This input is wired in
parallel with the 6.35mm (¼”).
9)
Link Output
Unbalanced 6.35mm (¼”) mono jack socket for link output to a guitar amplifier etc. This input is wired in parallel
with the 6.35mm (¼”).
Technical Specification
•
Frequency Response:
10Hz ~ 40kHz
•
Noise:
105dB
•
THD+N@1kHz:
<0.005%
•
Input Impedance:
>250k
Ω
•
Load Impedance:
>600
Ω
•
Battery Type:
9V (
alkaline recommended
)
•
Dimensions:
5.91” x 2.16” x 4.53”
•
Weight:
1.3 lbs.
Compliance
When this product reaches the end of its life, do not dispose with household waste. Dispose of Stellar Labs products in an
environmentally sound fashion, contact MCM Electronics for more details at
www.mcmelectronics.com
.
Warranty
Stellar Labs products are warranted, by MCM Electronics, against manufacturer defects for a period of one year from the original date
of purchase. This warranty is limited to manufacturer defects, in either materials or workmanship. MCM Electronics nor any other
worldwide divisions of Premier Farnell PLC, is not responsible for any consequential or inconsequential damage to any other
component, structure or the cost of installation or removal of said items. Defective items should be returned to the retailer from
whom they were originally purchased.
This warranty will not cover damage due to improper use such as (and not limited to) damaged cones, mounting frames, voice coils
or items damaged by weather including exposure to moisture.
For questions or specific information regarding warranty replacement or repair, contact:
STELLAR LABS
www.mcmelectronics.com
