3
Operation:
1)
Power Indicator
The power indicator will illuminate when the DI box is switched on and operational from a 18-48V phantom power
source. When used with a 9V PP3 battery the power indicator will flash.
2)
Power Switch
On/Off control. Move the switch do the ON position to switch on the unit. Switch off after use to preserve battery life.
3)
Ground Lift
The ground lift switch can be used to prevent earth loops within the system. Hums caused by ground loops often
occur around 50Hz. Move the switch to the UP (LIFT) position.
4)
Balanced XLR Output
Standard 3-pin XLR balanced output. Pin 1 GND, pin 2 +ve signal (Hot), pin 3 –ve signal (Cold). Connect the output
of the DI box to your mixing console’s balanced XLR mic input taking care to use good quality 2-core screened cable
with all pins wired. To prevent any noise, clicks or pops the mixing console’s input channel should be muted before
the connection is made.
