Page <2>
V1.0
24/06/22
Important safety notice
Please read below safety instructions carefully before installation and operation
1. Please pay attention to all the warnings and hints on this device
2. Do not expose this unit to rain, moisture and liquid
3. Do not put anything into the device
4. Do not repair the device or open the enclosure without professional person guidance to avoid electronic shock
5. Make sure good ventilation openings to avoid product overheating damage.
6. Shut off power to make sure environment is safe before installation
7. Do not plug-in/out the network cables and IR cables when it is in using to avoid cables damage.
8. Use DC 5V only. Make sure the specification matched if using 3
rd
party DC adapters.
Introduction
This transmitter extends HDMI signal wirelessly from source device to display device up to 200meters with the advanced
application of HDbitT transport protocol and wireless technology. It requires no cables between sender (TX) and receiver (RX)
which makes the installation easy and clean.
Note:
1. Transmission distance will be different due to the envirinment.
2. Wall, brick or glass will shourten the signal cover range or cause big signal loss.
Features
• Transmit HDMI signal from source device to display device up to 200meters wirelessly.
• Support IR remote control function to control source device content from long distance.
• No cable between sender (TX) and receiver (RX).
• Easy and clean installation.
Package contents
Installation Requirement
1. HDMI source device (DVD, PS3, Set top box, PC etc)
2. HDMI display device like SDTV, HDTV, and projector with HDMI port.
