Page <3>
V1.0
24/06/22
Panel description
1. HDMI Extender TX sender
1.
Power LED
lights when power is on
2.
Data transmission LED
LED blinks slowly when it is building connection. LED blinks fast when it is
succussfully connected and transmitting data
3.
Connection LED
lights when wireless signal is well connected
4.
Power input
Connect with DC5V/3A power adapter
5.
Reset
Press reset button to restart the device
6.
HDMI input
Connect with HDMI source device
7.
IR blaster extension cable interface Connect with IR blaster extension cable. Please put the IR blaster close to
source device to best transmit the IR signal from receiver
8.
Antenna
Launch wireless signal
2. HDMI Extender RX receiver
1.
Power LED
lights when power is on
2.
Data transmission LED
LED blinks slowly when it is building connection. LED blinks fast when it is
succussfully connected and transmitting data
3.
Connection LED
lights when wireless signal is well connected
4.
Power input
Connect with DC5V/3A power adapter
5.
Reset
Press reset button to restart the device
6.
HDMI input
Connect with HDMI display device
7.
IR receiver extension cable interface Connect with IR receiver extension cable. Please make sure the remote
control is within the required range of IR receiver
8.
Antenna
Receive wireless signal
