stellar labs 108-14-40, Руководство пользователя

Страница: 12 / 44

Page 6 | Stellar
®
108-14-40 Shuttle Owner’s Manual
• When positioning mounts to frame, tie-down castings are bolted to the underside of
each tie down plate located on the outside of the main rails of the base. The tie-down
plate closest to the front of the base requires one mount on each side of the pin. This
is the only time two tie down castings are required per a single tie-down plate. The tie-
down plates are designed with multiple slots to offer more flexibility in mounting locations.
Additional holes may not be added to the tie-down plates.
• Using the tie-down castings as a guide, drill 11/16” holes through the truck frame as
shown.
Step 2: Drill mounting holes.
NOTE: FOR THE FRONT MOUNT AT LEAST THREE BOLTS ARE REQUIRED TO ANGLE THE LOADER TO THE MOUNT AND TWO BOLTS
TO MOUNT THE ANGLE TO THE TRUCK FRAME.
NOTE:
1. MULTIPLE HOLES ARE PREDRILLED ON THE BASE MOUNTING FLATS, ADDITIONAL HOLES MAY NOT BE ADDED.
2. ONLY THE FRONT ANGLE MOUNT REQUIRES 4 BOLTS TO INSTALL THE ANGLE MOUNT TO THE TRUCK FRAME AND
4 BOLTS TO INSTALL THE HOOK TO THE ANGLE MOUNT.
3. THE REAR 3 ANGLE MOUNTS REQUIRE 2 BOLTS EACH TO INSTALL THE ANGLE MOUNT TO THE TRUCK AND THE
HOOKLIFT TO THE ANGLE MOUNT.