Page 13
RE-POSITION THE FENCE LOCKING
LEVER
1. For shipping purposes, the fence locking lever is
installed upside down. Remove the lock nut
A
and
the fence locking lever B and the flat washer.
Fig. 14
2.
Re-install the locking lever with flat washer on top
as shown in
Fig. 15
and tighten the lock nut.
The lock nut must be oriented as shown in
D
.
Fig. 14
Fig. 15
INSTALL THE FENCE TILT LEVER
1. Thread the knob on the tilt lever A.
Fig. 16
2. Screw the tilt fence lever into the threaded hole
in the fence.
Fig. 16
INSTALL THE DUST PORT
Install the dust port to the left side of the base using
4 small Phillips screws with small flat washers.
Fig. 17
Fig. 17
INSTALL THE BASE DOOR
Attach the base door A to the base as shown.
Fig. 18
Fig. 18
A
B
B
B
A
A
