Page 10
ASSEMBLY
CASTERS
1. Place the stand up side down on the
floor and use the cardboard to pro-
tect from scratching.
2.Place a caster in the cen-
ter of a braket and align
both braket caster hole.
3.Put M8 hex screw and fix
the hex nut by using #13
wrench.
4. Repeat the procedures
for the other caster.
5. Place the movable caster in the center of
the stand square tube and align holes.
6.Put M8 hex screws and fix the hex nuts by
usign #13 wrench.
7.Insert hex nuts to foot pad screws.
8. Fix the assembled foot pads to the stand. Don’t tight
them.
9.Turn the stand side up and test if the stand is stable. Ad-
just foot pads if necessary and tight the hex nuts.
