Stel TIG 303, Инструкция по эксплуатации

Страница: 17 / 36

6943200010
17
A) IDENTIFICATION
Name, address of the manufacturer
Type of welding machine
Identification with reference to serial number
Symbol of the type of welding machine
Reference to the construction standards
B) WELDING OUTPUT
Symbol of the work process
Symbol for welding machines suitable for working in
an environment with a high risk of electric shock.
Symbol of the welding current
Assigned no-load voltage (operating voltage)
Range of the welding current
Values of the intermittence cycle (in 10 minutes)
Values of the assigned welding current
Values of the conventional loaded voltage
C) POWER SUPPLY
Power supply symbol (number of phases and
frequency)
Assigned power supply voltage
Maximum power supply current
Maximum effective power supply current (identifies
the line fuse)
D) OTHER CHARACTERISTICS
Degree of protection .
TIG 303/453 AC/DC
Efficiency MMA
TIG 80%
75%
Idle state power
consuption MMA
TIG 180 W
75 W
TIG 453S AC/DC
Efficiency MMA
TIG 80%
75%
Idle state power
consuption MMA
TIG 180 W
75 W
INSTALLATION
INSTALLATION
WARNING: This Class A equipment is not
intended for use in residential locations where the
electrical power is provided by the public low-
voltage supply system. There may be potential
difficulties in ensuring electromagnetic compatibility
in those locations, due to conducted as well as
radiated disturbances. TIG 303 AC/DC, TIG 453
AC/DC does not comply with
IEC 61000-3-12 .If it is
connected to a public low voltage system, it is the
responsibility of the installer or user of the
equipment to ensure, by consultation with the
distribution network operator if necessary, that the
equipment may be connected
The good operation of the machine is ensured by
correct installation; you must therefore proceed as
follows:
- Position the machine in such a way that there is
no obstacle to the air circulation ensured by the
internal fan since the internal components require
suitable cooling.
- Ensure that the fan does not send deposits or
dust into the machine.
- Avoid impacts, rubbing, and
– absolutely no
exposure to dripping water, excessive heat
sources, or any abnormal situations.
MAINS VOLTAGE
The machine operates from the following mains
supply voltage(s):
TIG 303 AC/DC
400V±15% 3F
TIG 453 AC/DC
400V
±15%
3F
A
A
B
C
A
B
C
D