Steinmeyer FMC200, Руководство по эксплуатации

Страница: 105 / 128

Steinmeyer Mechatronik 6 Setting up and connecting the FMC controller
Operating manual FMC200 controller
E-39
6.2 Connecting the FM controller to the positioning system
WARNING
1. Connect the axes of the positioning system to the axis ports
of the controller (depending on the design port 1, port 2 and
port 3).
2. Connect the computer to the USB or RS232 interface of the
controller (PC port or FMC link).
3. Connect the controller to the mains adapter (power port).
4. Connect the mains adapter to the power supply.
INFORMATION
FMC controllers can also be used for setting up a CAN network (see
“Integrating the FMC controller in the CAN network” starting from
page 44).
Risk of injury and property damage due to incorrect com-
missioning!
Incorrect commissioning can result in serious injuries and consid-
erable property damage.
• Route the cables in such a way that they do not pass
through the action zone of the connected devices and peo-
ple do not get caught in them.
• Note the permissible bending radius of cables.