DISTANCE MEASURING
7
4
3
Button for distance measuring (3)
To measure the distance to an object, you must lock onto it
precisely. To do this, activate the target mark by pressing the
button for distance measuring (3) for approx. 3 sec. Release
the button to start the measurement and the estimated range
is shown on the display.
The illumination of the target will go off shortly during the
measurement.
You can start a new measurement at any time by pressing the button for distance measuring (3) again.
If the object distance is less than 25 meters/27yards or if the range is exceeded or the object does not
reflect sufficient light, the display shows '----'.
When the display turns off, the distance meter is automatically deactivated.
Note:
Depending on the angle of the optical systems to each other, i.e. the set interpupillary distance,
the displays may appear slightly slanted.
