INSERING AND REPLACING THE BATTERY
5
Inserting and replacing the battery
The laser range finder is powered by a type 3 volt CR 2
lithium battery.
1. To insert and replace the battery, unscrew the
battery cover (5) by turning anticlockwise.
2. Insert the battery with the positive end forward
(according
to
the
symbol
in
the
battery
compartment).
3. Then screw the battery cover back on by turning
clockwise.
Battery charge level
A new battery is sufficient for more than 5.000 measurements at 20°C.
Depending on the conditions of use, the battery life time can be significantly shorter or longer than
this. Low temperatures and frequent use of the scan mode shortens the battery life.
A flat battery is indicated by a flashing measured value and target display.
Warning:
Cold conditions impair the battery performance. At low temperatures, the LRF should
therefore be carried close to the body and used with a fresh battery.
5
