STEINEL Spot DUO, Руководство пользователя, Страница: 21 / 146

21
6. Function
Spot ONE S / Spot DUO S
Factory settings
– Twilight level: 1000 Lux
–
Time setting: 8 seconds
Twilight setting (Fig. 6.2 F)
The chosen response threshold can be infinitely varied from approx. 2 to 1000 Lux.
– Control dial set to = daylight mode (not depending on ambient brightness)
– Control dial set to = night-time operation (approx. 2 lux)
The control dial must be turned to
when adjusting the detection zone and per-
forming the functional test in daylight.
Time setting (Fig. 6.2 G)
The light's stay ON time can be set to any period from approx. 8 seconds to a
maximum of 35 minutes. Any movement detected before this time elapses will restart
the timer.
– Control dial set to + = approx. 35 minutes
–
Control dial set to – = approx. 8 seconds
Note:
After the light switches OFF, it takes approx. 1 second before it is able to start detect-
ing movement again. The light will only switch ON in response to movement once this
period has elapsed.
Spot DUO S
Factory configuration:
Both light heads are interconnected and always switch ON and OFF at the same time.
To operate the two light heads separately, the connection between the terminals must
be removed ( 1 and 2).
Spot ONE SC /Spot DUO SC
Factory settings
– Twilight level: 2000 lux
–
Time setting: 5 seconds
GB