background image

- 18 -

- 19 -

COM1/COM2 only:

Twilight level:  

500 lux

Time setting for COM1:  

 

5 min

Time setting for HVAC:   

15 min

Fully/semi-automatic mode:  

 

 

  

 

fully automatic

Switch-ON delays for HVAC: 

 

OFF

Setting detection

The detection zone can be also set via 

the potentiometer (E) on the back of the 

sensor module in accordance with the 

table. 

(Fig. 3.7/6.1)

The sensitivity of the four pyros (A to D) 

can be set via the app.

Bluetooth grouping

The sensors can be operated as indi-

vidual sensors or as a group. The group 

is interconnected via wireless commu-

nication.

The COM1 and COM2 versions 

additionally provide the following 

functions:

Twilight setting

The chosen response threshold can be 

set from approx. 2 to 2,000 lux.

Daytime operation

When movement is detected, the sensor 

switches the load ON irrespective of 

ambient brightness.

Teach-IN

The Teach-IN function is to be selected 

at the level of light at which you want the 

sensor to respond to movement from 

now on. The level of ambient brightness 

measured in this way will be saved after 

10 seconds. The load is deactivated 

during this period.

Time setting

The chosen stay-ON time can be set 

from a minimum of 5 seconds to a  

maximum of 60

 

minutes. If no movement 

is detected, the sensor switches OFF 

after the stay-ON time expires.

Neighbouring-light function

The neighbouring-light function can be 

activated and deactivated via the Steinel 

Connect app. This function assigns the 

neighbouring groups to the active sensor 

group. The group responds to activation 

signals from the neighbouring group 

assigned to it and switches the light ON 

as defined in the settings.

Operating mode
Semi-automatic mode

The light now only switches OFF auto-

matically. Light is switched ON manually. 

Light must be requested using the button 

and stays ON for the time set.

Fully automatic mode

The light automatically switches ON and 

OFF in relation to light level when some-

one is present. Light can be switched ON 

and OFF manually at any time. 
This temporarily interrupts the automatic 

switching function.

Presentation mode

If light is switched OFF via a push-button, 

the sensor activates the presentation 

mode. The load remains switched OFF 

as long as movement is being detected. 

As soon as movement is no longer being 

detected and the stay-ON time has 

elapsed, the sensor returns to normal 

sensor mode.

GB

Содержание Professional IR Quattro HD-2 BT IPD

























Отзывы: