STEINEL professional HPD2 KNX, Быстрый старт

Страница: 15 / 18

– 15 –
GB
4.2 Display
4.2
Bild 4.3 DE
Bild 4.3 EN
–
Enable night mode:
Enables infra red lighting during low light conditions.
–
Disable night mode:
Infra red light disabled. No detection performed below 0.2 lux.
–
Enable hi-res detection:
Detection is made in several sequential runs and can give better reliability. Detection time is four times longer however.
–
After detection of the first person "safety detection" is enabled.
–
Disable hi-res detection:
Detection on single frame is made in single run. This is normal behavior.
4.3 Reset
4.3
There are three ways to reset:
–
Restart (sensor restart loss of settings).
–
Reset to factory settings (all settings are lost, the sensor restarts).
–
Press and hold reset button for 15 seconds for a software reset and reset to factory settings.