STEINEL L 910, Руководство пользователя

Страница: 18 / 152

16
6� Function
Functions can be set for the
L 910 S, L 930 S sensor versions.
Factory setting: all DIP switches OFF
Once installed, the light can be put into
operation. All pre-programmed functions are
selected via DIP switches 1 to 6. (Fig� 6�1)
DIP 1: effect lighting
OFF = sensor mode, main light / soft start
ON = effect lighting as from light-level
setting selected, main light activated
by sensor
DIP 2: night economy mode,
effect lighting
OFF = effect lighting ON all night
ON = effect lighting ON for half the night in
relation to setting selected at DIP 1
DIP 3: twilight setting
OFF = 20 lux
ON = 2 lux
DIP 4: time setting
OFF = 2 minutes
ON = 15 minutes
DIP 5: test mode
OFF = test mode deactivated
ON = test mode activated (5 seconds)
Note:
Communication (optional group interconnection)
to the interconnected lights is deactivated in
test mode. Only the light being tested is in test
mode. The other lights remain in group mode.
Delay time is 8 seconds. The light is in daytime
mode. Manual override (4 h mode) cannot be
selected in daytime mode.
DIP 6: reach adjustment
OFF = 12 m (Fig� 6�2)
ON = 5 m (Fig� 6�3)
If a mains switch is installed in the mains sup-
ply lead, the following functions are available in
addition to simply switching light ON and OFF:
Manual override (Fig� 6�4)
1) Activate manual override:
Switch OFF and ON twice. The light is set to
manual override for 4 hours. Then it returns
automatically to sensor mode.
2) Deactivate manual override:
Switch OFF and ON once. Light goes out or
switches to sensor operation.
Important:
Switching must take place within 0.2 to
1 second.
Note:
When groups are interconnected, this command
is sent to all of the lights that are connected.
7� Maintenance / care
The product requires no maintenance.
The light can be cleaned with a damp cloth
(without detergents) if dirty.
Important note: the control gear cannot be
replaced.
8� Disposal
Electrical and electronic equipment, accessories
and packaging must be recycled in an environ-
mentally compatible manner.
Do not dispose of electrical
and electronic equipment
as domestic waste�
For EU countries only:
under the current European Directive on Waste
Electrical and Electronic Equipment and its
transposition in national law, electrical and
electronic equipment no longer suitable for use
must be collected separately and recycled in
an environmentally compatible manner.