www.steinel.net
(800) 852-4343
Troubleshooting
18
No power at the
sensor
Lights do not
switch ON
breaker has tripped,
is not switched ON, or
break in wiring
short circuit
low voltage wiring to
power pack is incorrect
light level setting is in
nighttime mode during
daytime operation
lamp burned out
power is off
breaker has tripped
detection zone not
correctly adjusted
power pack is in
manual on mode when
being used with a line
voltage switch
reset breaker, check
wiring with voltage
tester
check for proper
wiring connections
check for proper
wiring connections
adjust light level
setting
replace lamp
turn power on at
circuit breaker
reset breaker
readjust
place power pack in
the auto on mode
Problem
Cause
Remedy
