STEINEL HBS 200, Руководство по установке

Страница: 7 / 9

www.autani.com www.autani.com
12 13
Setup & Commissioning
HBS 300 Coverage
The HBS 300 contains three pyroelectric
sensors to detect occupancy. At an
installation height of 8 to 45 feet, maximum
reach is 22 feet radial and 60 feet tangential.
If needed, the detection zone can be
adjusted (see below).
Coverage may vary depending on mounting
height and environmental conditions.
HBS 200 Coverage
The HBS 200 contains two pyroelectric
sensors to detect occupancy and has an
aisle way coverage of up to 100 feet when
mounted at 40 ft. If needed, the detection
zone can be adjusted with a lens cover (see
below).
In addition, the view of the HBS 200 can
be rotated 90 degrees. To do this, remove
the sensor housing from the back box
by pressing the tabs on either side of the
sensor.
Coverage may vary depending on mounting
height and environmental conditions.
10
20
30
40
LC3
40 ft
50 50 40 40 35 ft
22 ft 22 ft
35 ft
10
20
30
40
Aisle
LC3
radial
tangential
40 ft
13 ft
50 ft
53 ft 53 ft
50 ft
Setup & Commissioning
Lens Covers
Lens covers can be used to adjust the
HBS 300’s coverage as needed. The
covers are plastic and snap to the front of
an HBS 300 or HBS 200 sensor.
LC4 reduced range lens
cover for HBS 300
LC1 aisle starter cover for HBS 200
LC5 180° half moon lens
cover for HBS 300
10
20
30
40
40 ft
13 ft
50 ft
53 ft
LC1
radial
tangential
10
20
30
40
40 ft
LC4
30 ft
22 ft 22 ft
30 ft
10
20
30
40
40 ft
LC4
30 ft
22 ft 22 ft
30 ft
10
20
30
40
LC5
40 ft
35 ft
22 ft
40 50