STEINEL Control Pro DT Quattro DCS, Руководство пользователя

Страница: 58 / 63

- 58 -
Proper use:
– Presence detector for indoor
mounting for connecting to the
bus powered data line of the room
controller.
Product dimensions for
US Quattro DCS/DT Quattro DCS
(Fig. 3.1)
Product dimensions for
US Oneway DCS/US Hallway DCS
(Fig. 3.2)
Detection zone (Fig. 3.3/3.4)
Coverage Diagramm at 9 ft mounting
high.
The ultrasonic and DT Quattro DCS
presence detectors from the Control
PRO range control lighting, e.g. in
offices, schools, public buildings, in
relation to ambient light level and the
presence of persons.
Ultrasonic sensor may false trigger
when exposed to high volumes of air
flow. Sensors should be installed at
least 4 feet from supply ducts and
a minimum of 6 feet from horizontal
discharge ducts.
4. Wiring
– The sensor is a polarity insensitive
device. This means it can be
connected to the Data Line
provided by the DCS in either way.
– The sensor is intended for
concealed, indoor installation in
ceilings and sofit.
Wire labelling:
Red and blue (polarity insensitive).
US
1. Installer
This high-quality product has been
manufactured, tested and packaged
with the assurance of your complete
satisfaction. Please read all of the
instructions before installation.
This will help you to be familiarized
with all the features and options
available to you with these devices.
This will also assist you to minimize
installation time and provide
maximum energy savings and
trouble-free operation.
2. Safety Warnings
!
WARNING
!
• The wiring of this device must
be carried out professionally
and in accordance with all local
and National Electric Codes and
electrical operating conditions.
• Class 2 devices are not suitable
for Class 1 installations.
3. US Quattro DCS/
DT Quattro DCS/
US Oneway DCS/
US Hallway DCS
Description
Lighting is controlled in relation to
both the presence of motion and
ambient light levels.