STEINDORFF NYMCS-VM400, Инструкция по эксплуатации

Страница: 9 / 15

STEINDORFF
®
- 8 -
our website and download from there.
System support:
Windows XP SP3, Windows 7,Windows 8, Windows10
Process circumstances
：
Microsoft.Net Framework 4.0
Microsoft Visual C++ 2010 Runtime
If there isn't either of the runtimes above mentioned, there would be mistake during installation.
＊ Open the zip file that you’ve download and run it.
Software Operation
*Icons Definitions
Zoom In Measuring a 3points angle (degree)
Normal Distance of parallel lines(Length)
Zoom out Distance of a point and a line (Length)
Undoes the last action Distance of 2 circles (Radius, length)
Cross hairs (crosier,4 grid, 8 grid) Distance of a line and a circle(Radius, length)
Distance of 2 horizontal points Add a square mark
Distance of 2 vertical points Add a circle mark
Distance of any 2 points Add text
Measuring a rectangular
(width,height, circumference&area) Distance of 2 lines(Length)
Measuring an ellipse(Long-axis radius, short-axis
radius, circumference&area) 3 points circle
(radius, circumference&area)
Measuring a radius circle(radius, circumference&area) Edge detection
Measuring a diameter circle
(diameter, circumference&area) Brightness increase/decrease
Measuring a 3 points circle(radius, circumference&area) Flip horizontal
Measuring a 3 points arc
(radius,degree,circumference&area) Sharpen
Measuring a polygon (circumference&area) Smooth
Measuring fold-lines (length) Take a picture
Measuring a 4 points angle (degree) Take a video