Appendix
UR28M
Operation Manual
36
*1The following chart indicates an effect insertion location.
*2 One of the MIX 1–3 signals can be sent to the REV-X.
*3 The built-in REV-X is equipped with an “FX Bus” which is used for sending the signal from DAW software to
the REV-X. For example, to send the recorded audio data to the REV-X, you can check the sound with the
REV-X, which is used for monitoring during the recording.
*4 To select the output signal for LINE OUTPUT A–C, use the buttons on the device . The following charts
indicate the structures.
You can apply four Channel Strips to mono channels, or two Channel Strips to a stereo channel.
Limitations on the use of effects
The maximum number of Channel Strip and Guitar Amp Classics iterations which can be used simultaneously
are limited to the following. For example, Channel Strip can be used for two mono channels, while Guitar Amp
Classics can be used for one mono channel simultaneously.
Effect
Effect
Upper (INS.FX)
From input on the device
To DAW
input
To DAW
input
To DAW
input
To output on the device
Lower (MON.FX)
From input on the device
To output on the device
Not applied (OFF)
From input on the device
To output on the device
Channel Strip
Guitar Amp Classics
Mono
Stereo
Mono
Stereo
4
0
0
-
2
1
0
-
2
0
1
-
0
2
0
-
0
1
1
-
Содержание UR28M
Страница 1: ...EN DE FR ES JA USB AUDIO INTERFACE IT...
