26
27
22.07.2019
Product name
WiFi Weather
Station
Model
SBS-WS-300
Temperature
Measurement
range
(outdoor) [°C]
-40÷60
Measurement
range (indoor)
[°C]
0÷50
Measurement
accuracy [° C]
±1
Humidity
Measurement
range [%]
10-99
Measurement
resolution [%]
1
Measurement
accuracy [%]
±5
Rainfall
Measurement
range [mm]
0-6000
Measurement
resolution
[mm]
0,254 (if the
volume of rain
<1000mm)
1 (if the volume of
rain >1000mm)
Measurement
accuracy [%]
±10
Wind speed
Measurement
range [m/s]
0-50
Atmospheric
pressure
Measurement
range [hPa]
700-1100
Measurement
accuracy [hPa]
±5
Alarm duration [s]
120
Data transmission range [m]
100
Transmission frequency [mHz]
868
IP protection
class
Receiver
IPX0
Transmitter
IP44
Battery type
Receiver
3xAAA
Transmitter
2xAA
Dimensions
[mm]
Receiver
195x140x20
Transmitter
340x295x145
The product satisfies the relevant safety
standards.
Read instructions before use.
The product must be recycled.
WARNING! or CAUTION! or REMEMBER!
Applicable to the given situation (general
warning sign),
ATTENTION! Rotating parts, entanglement
hazard!
The terms "device" or "product" are used in the warnings
and instructions to refer to WIFI WEATHER STATION. Do
not use in very humid environments or in the direct vicinity
of water tanks.
2.1. SAFETY IN THE WORKPLACE
a)
Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
b)
Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
c) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
d)
Keep packaging elements and small assembly parts
in a place not available to children.
e)
Keep the device away from children and animals.
TECHNICAL DATA
U S E R M A N U A L
2.2. PERSONAL SAFETY
a)
Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b)
The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
c)
Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
3. USE GUIDELINES
The device is intended for meteorological measurements,
incl. temperatures, rainfall, air humidity, wind speed, etc.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
3.1.1. TRANSMITTER
1.
Wind direction indicator
2.
Wind speed meter
3.
Light sensor
4.
Humidity / temperature meter
5.
Precipitation level meter
6. Level
7.
Solar panel
8.
Pin "U"
9.
Battery compartment
10. [RESET] button
11. LED diode
1. GENERAL DESCRIPTION
The user manual is designed to assist in the safe and
trouble-free use of the device. The product is designed
and manufactured in accordance with strict technical
guidelines, using state-of-the-art technologies and
components. Additionally, it is produced in compliance
with the most stringent quality standards.
DO NOT USE THE DEVICE UNLESS YOU HAVE
THOROUGHLY READ AND UNDERSTOOD THIS
USER MANUAL.
To increase the product life of the device and to ensure
trouble-free operation, use it in accordance with this user
manual and regularly perform maintenance tasks. The
technical data and specifications in this user manual are
up to date. The manufacturer reserves the right to make
changes associated with quality improvement. The device
is designed to reduce noise emission risks to a minimum,
taking into account technological progress and noise
reduction opportunities.
LEGEND
The original operation manual is in German. Other
language versions are translations from German.
PLEASE NOTE!
Drawings in this manual are for
illustration purposes only and in some details may
differ from the actual machine.
2. USAGE SAFETY
ATTENTION!
Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in an electric shock, fire and/
or serious injury or even death.
REMEMBER
When using the device, protect
children and other bystanders.
d) Remove all adjusting tools or spanners before
turning the device on. A tool or spanner left in the
revolving part of the device may cause injury.
e)
The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.3. SAFE DEVICE USE
a) Do not overload the device. Use the appropriate
tools for the given task. A correctly-selected device
will perform the task for which it was designed
better and in a safer manner.
b)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f)
Clean the device regularly to prevent stubborn
grime from accumulating.
g)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
h)
Keep the device away from sources of fire and heat.
i)
Do not overload the device.
j)
Keep batteries out of reach of children when not in
use.
k)
Before use, make sure that the wind turbine and
the rotor are not blocked in any way, which would
disturb the measurement results.
l)
The external transmitter should be mounted in
the open air in a place where it can be exposed to
weather conditions. Mounting close to canopies,
walls or trees may result in disturbing the
measurement results.
ATTENTION!
This product‘s view can be found on the
last pages of the operating instructions (pp. 207).
3.1.2. RECEIVER
1.
Time panel
2.
Lunar phase panel
3.
Barometric pressure panel
4.
Weather forecast panel
5.
Insulation panel
6.
Light panel
7.
Wind speed panel
8.
Wind direction panel
9.
MAX / MIN
10. Rainfall panel
11. Outdoor temperature panel
12. Outdoor humidity panel
13. RF icon
14. Indoor humidity panel
15. Indoor temperature panel
16. Date
17. WiFi icon
18. DST - Automatic time change from daylight to
standard time
3.1.3. FUNCTION BUTTONS PANEL
A.
SET - Press this button to display the MAC address. -
Hold this button to enter the setting mode.
B.
TEMP - Press this button to display wind coolness,
heat indicator and dew point temperature.
C.
RAIN - Press this button to display the rain indicator
(day / week / month / total). To reset the rain display,
hold the button for 2 seconds.
D. WIND - Press this button to display wind / gust
direction
E.
PRESSURE - Press this button to display the average
absolute pressure value of 12/24/48/72 hours.
Press and hold the button for 2 seconds to display
absolute and relative pressure.
F.
ALARM - Press this button to display the alarm
temperature / humidity / air flow speed / wind in the
day / wind value
G. MAX / MIN - Press this button to display the
maximum and minimum temperature / humidity /
water flow rate / water flow day / wind / insulation /
light / absolute pressure value
H. LIGHT / SNOOZE - Press this button to adjust the
brightness of the LCD backlight.
WARNING!
1.
After turning the power on, press the WIND button
and PRESSURE button to reset the device. The
device's default settings will be restored.
2.
To bypass radio reception, press the TEMP button
after turning the device on.
3. To increase or decrease the numbers, hold the
WIND/+ button or the PRESSURE/- button for 2
seconds.
4.
The setting procedure can be stopped at any time
by pressing the LIGHT / SNOOZE button or after a
30-second timeout.
3.2. PREPARING FOR USE
ASSEMBLING THE APPLIANCE
CAUTION: Before installing the weather station in a target
place, configure the set and, afterwards, check if the device
is working properly.
Inserting batteries
1.
Remove the battery compartment cover.
2.
Insert the batteries into the compartment observing
the polarity
EN
EN
