D.
To select the "AUTO" manual measurement range, select the "AUTO"
function with the "FUNC" button. The display will show "AUTO" and t
he
capacitance measurement unit "F".
E.
Read the measured measurement on the display.
FUNCTION
RANGE
RESOLUTION
ACCURACY
CAPACITY
3nF
1pF
±(2.5%rdg+3dgt)
30nF
10 pF
300nF
100 pF
3μF
1nF
30μF
10nF
300μF
100nF
3mF
1μF
30mF
10μF
±(3%rdg+3dgt)
4.3.
Continuity measurement
A.
Set the slide control (4), in R/D/C (Resistance, diode, capacitance) position.
B.
Select "SCAN" mode with "FUNC" button.
C.
Attach the probes to the tested component, if the resistance indicates a result
below 30Ω, the
meter will automatically switch to the circuit continuity
measurement mode.
D.
To set the circuit continuity measurement manually, press the "FUNC" button
until the symbol (D) appears on the display.
Then attach the probes to the component under test.
E.
If the resistance falls below 30Ω, the meter will generate a sound signal, while
for an open circuit the meter will show the symbol "OL" on the display.
4.4.
Diode test
A.
Move the slide control (4) to the middle position and select the "ZENER/LED"
symbol.
