Using 2 detectors in close
proximity to each other
Keep the two detectors at
least 6 meters apart.
The detector does
not detect anything.
Sensitivity set too low
Increase sensitivity.
Probe is not aligned parallel
to the ground
Set the probe parallel to
the ground.
The display shows
several targets at
the same time or
emits several
sounds
simultaneously.
The detector has found
several different metal
objects.
Reduce sensitivity to
eliminate detection of
deeper targets.
The detector cannot identify
the target. Sometimes,
oxidized metal also causes a
different target and tone to
be indicated.
Move the probe at different
angles.
The detector does
not work.
The 5-pin cable is incorrectly
connected.
Connect the cable correctly.
The battery is discharged.
Replace the battery.
Содержание SBS-MD-22
Страница 107: ......