Steinbach Speedcleaner RX5, Инструкция по эксплуатации

Страница: 8 / 60

Speedcleaner APPcontrol | 2017_V1 Page 8 of 60
EN
9. Drive wheel
10. Propeller
11. Nozzle insert
12. Frame
13. Top cover
14. Control unit
Preparation
Place the cleaner into the water, while holding onto the hanging ring
(Fig, 4). Once all the air has escaped from the cleaner, (the cleaner
must be completely free of air, otherwise normal operation will be af-
fected), it will sink to the bottom on its own.
Caution: For optimal performance, make sure that there is no more
air in the cleaner (air bubbles stop coming out of the cleaner, and it
stays on the pool floor properly).
Connecting the power source
When the cleaner is completely on the pool floor, take the power ca-
ble, roll it out fully and push the plug into the socket on the electricity
control box. Then connect the cable to the socket (Please note when
connecting cables that the plugs are in the right direction and posi-
tion in relation to each other), and tighten the nuts on both sides.
Connect the mains cable to the power source. The swimming pool
cleaner is now ready for use.
Panel
3 TIME
Working
duration
option
Different working duration for dif-
ferent purpose
Fig. 9
1H 2H 3H
indicate different working duration
4
Indica-
tor
Indicate the machine status
Working
status
Two or three indicators
on Machine
stopped
1H flash slowly
Machine
running
for 1 hour
2H flash slowly
Machine
running
for 2 hour
3H flash slowly
Machine
running
for 3 hour
ALL light on
Working
under
mode ALL
WALL light on
Working
under
mode
WALL
FLOOR light on
Working
under
mode
FLOOR
ALL+ FLOOR light on
Working
under
mode
ALL-
FLOOR
ALL>>WALL>>FLOOR
flash in order Manual:
forward
FLOOR>>WALL>>ALL
flash in order Manual:
backward
3H>>2H>>1H flash in
order Manual:
left turn
1H>>2H>>3H flash in
order Manual:
right turn
All lights flash slowly
Auto run
finish
You can also control the Speedcleaner APPcontrol using the APP.
Please use the following link (A IOS): Fig 13.
Bluetooth for smart phone
(
optional
）(
Fig. 10)
NO. SIGN INDICATE FUNCTION
1 ON/OFF Switch on or
- Press this button machine
will be switched on.
- Press this button twice ma-
chine will work under se-
lected mode.
-Press this button third time
machine will be switched
off.
2 MODE
Mode options
Choose different mode
for different purpose.
Fig. 5
“ALL”mode is let machine
clean swimming pool floor
wall and water line together.
(once wall then once floor)
Fig. 6
“WALL” mode is let ma-
chine clean swimming pool
wall only.
Fig. 7
“FLOOR” mode is let ma-
chine clean swimming pool
floor only.
Fig. 8
“ALL + FLOOR” mode is let
machine clean the swim-
ming pool floor three times
then climb wall once.
NO. indicator function
1 Bluetooth status
● disconnected
● connected
2 Searching signal
press to start searching Bluetooth
signal
3
▲
Manual walking forward
4
▼
Manual walking backward
5
◀
Manual left turn