Steinbach 049275, Оригинальное руководство пользователя, Страница: 52 / 285

Connecting the lines
Establishing the power supply
The MINI heat pump cannot be operated with an external timer and must be switched
on/off via the RCD adapter.
1. Connect the RCD adapter
C
to the voltage supply set up at the installation site.
The power supply has been established.
Connecting a drain hose for condensate (optional)
1. Insert the drain spout
4
into the hole in the base plate.
2. Attach the drain hose (garden hose) for condensate to the drain spout
4
.
The drain hose for the condensate is connected.
Display
Standby mode
When in Standby mode, the heat pump is operationally ready but deactivated. Pressing
the On/Off button
15
switches the heat pump into the Operate mode.
After being switched on, the heat exchanger must first warm up before the
heat pump is ready for operation in the Operate mode. This process can take
up to 90 seconds.
Display:
- The Display
14
shows the word “OFF”.
Operating mode
In operating mode the heat pump heats the water up to the set water temperature. The
standard value for the set water temperature is 27°C. The set water temperature can be
b15°C and +35°C. The heat pump switches into standby mode by pressing the
Set
G
14 15
52