STEIN Radius Circuit 180 Скачать руководство пользователя страница 8

Страница: 8 / 62

STEIN300_Radius Circuit_06_GB.doc / 01.2020

Safety instructions

3.1

General safety information



Radius circuits from STEIN Automation

are high quality products, manufactured to

recognised technical specifications.

The radius circuit left the manufacturing plant in a perfectly safe technical condi-

tion.



All models of the radius circuit comply with the requirements of UVV, the German

accident prevention regulations.



To maintain this situation, installation staff, users and service technicians must ob-

serve the notices and warnings contained in these operating instructions.



Radius circuits must only be installed and repaired by authorised personnel who

have been trained by STEIN Automation.



Only genuine spare parts from STEIN Automation may be used when carrying out

repairs to the radius circuit.

3.2

Appropriate use and liability exclusions

The radius circuit must only



be built into STEIN 300 belt systems.

Compatibility is only assured with STEIN 300 belt modules.



Be operated with suitable pallets with the permitted dimensions and weights



Be used indoors



Be operated in dry areas



Be employed in areas where there is no risk of explosion



Be used in a non-congested operation.

Fig. 3-1:

Radius circuit

- Maximum loading

Permitted loading is:

•

In the Z-axis: 12 Kg (WT + workpiece)

•

Содержание Radius Circuit 180































































Результаты поиска

Содержание Radius Circuit 180

Отзывы:

Бренды по названию

Популярные бренды

STEIN Radius Circuit 180, Руководство по эксплуатации

Результаты поиска

Содержание Radius Circuit 180

Отзывы:

Бренды по названию

Популярные бренды