
16
PROGRAM FUNCTION IN CD/USB or SD MODE
This feature allows you to program up to
20 CD
tracks and
99
MP3 (USB/SD)
tracks for playback in any order.
1) Press the
PROGRAM
button (
12/R12)
to enter the Program
Mode. The Program
number briefly shows
'0 0 1
', and the
PROGRAM
indicator light flashes on the display.
2) Press the
SKIP FWD
or
SKIP REV
button
(17/16) or
DN/FB
(R5) or
UP/FF
(R6) on
the Remote Control to select the
first track number you wish to enter into the program
memory - for example: Track Number
'008’
.
3) When the desired track number appears on the display,
press the
PROGRAM
button (
12/R12)
again to memorize the
track. The program number briefly shows
'0 0 2
', the
PROGRAM
indicator
will flash on the display.
4) Repeat the same steps above to select a different track number
to be programmed into memory until you have entered up to
20
CD
and
99 MP3 (USB
or
SD)
tracks into memory.
Note
: It is possible for the same track to be programmed to play multiple times
in the program sequence.
Press the
PLAY/PAUSE
(13/R4) button to start playback of
the programmed tracks. The
PROGRAM
indicator light stops
flashing. Playback will start with the first programmed track
and carries on until the last one has been played.
Cancel the programmed sequence by pressing the
STOP
button (
14/R7)
twice.
PHONES
jack
Using Stereo Headphones (Not Included)
During playback of all modes, connect a set of stereo headphones with a 3.5mm
mini-plug to the “
PHONES
” or Headphone Jack (29) on the front panel.
Before putting on the headphones, always set the
OFF/VOLUME
(27) control to
a low level. Then put the headphones on and gradually increase the Volume to
a comfortable listening level. Sound from the built-in speakers automatically
cuts out when the headphones are connected.