A
CD Pause & Playback
Press the "
PLAY / PAUSE
" key during playback. Playback stops at the current position and the
track number in the display starts to flash. To resume playback, press the "PLAY / PAUSE" key
again.
B
Stop Playback
Press the "
STOP
" button to stop playback. To continue, press the "PLAY / PAUSE".
C
Go to the Next or Previous Song
1.
During playback, repeatedly press the "
SKIP+ or SKIP–
" keys until the desired track is reached.
The selected track will now be played from the beginning.
2.
In "STOP" mode, press the SKIP+ or SKIP– keys repeatedly until the track you want to listen to is found. Press
the "PLAY / PAUSE" button to start playback of the selected title.
3.
If you press the "SKIP" button during playback, the current track will start again from the
beginning.
4.
To listen to the track in front from the start, press the "SKIP" button twice.
D
Searching for a Folder on an MP3-CD or USB Device/SD Card
When playing music stored on a USB device / SD Card or an MP3-CD with multiple folders,
press the "
FOLDER
" button to find the one you want.
E
Repeat function
1.
If the USB / SD connector and the CD contains no folders:
2.
Press the "
REPEAT
" key once to repeat a single item.
3.
Press the "REPEAT" key a second time to repeat all tracks.
4.
Press the "REPEAT" key three times to again repeat all tracks on the disc.
5.
Press the "REPEAT" key four times to complete the repetition.
C
Search for a section within a Track
During playback, hold down the "SKIP" button and keep it pressed in - release it when the
desired section has been found, at this point play will continue normally.
F
Program Functions
In Stop mode
1.
Press the "
PROGRAM
" button. The word "
MEMORY
" and the
characters "
P01
" flash on the display screen. Press the "SKIP" button to
select your favourite tracks and press the "PROGRAM" key again to save
the title.
2.
If you want to store another track, repeat the above steps.
3.
This unit can store up to 20 tracks.
4.
To play the programmed tracks, press the "PLAY / PAUSE button".
5.
Press the "STOP" key once to stop playback.
6.
Press the "STOP" key a second time to clear the programmed tracks.
7.
When the unit is turned off or a different mode (USB SD / AUX-PH / TUNER / TAPE) is selected with the function
button, the programmed tracks will be automatically deleted.
( 9 )
CASSETTE CARE
Two common causes of trouble experienced when using cassettes are:
Tape jamming, leading to uneven speed during playback.
Tape entangling, when the tape wraps itself around vital parts of the mechanism.
To avoid these problems occurring, take the following precautions:
1.
Check that there are no loose layers of tape visible through the cassette door window
(see fig. 1).
2.
Take up any loose layers, using a pencil or a ballpoint pen with a hexagonal barrel,
before inserting the cassette (see fig. 2).
Notes on Handling Cassettes
If the cassette feels tight whilst performing this operation (fig. 2), the tape may be
jamming due to ridges formed in the winding of the tape (visible through the cassette
door window).
In most cases, these may be removed by fast rewinding (F FWD) of the cassette from
one end to the other and back again.
Do not expose cassettes to direct sunlight, dust or oil.
Do not touch the tape. Fingerprints attract dust and dirt.
Avoid dropping a cassette or expose it to excessive vibration.
We recommend you use well-known brands of tape, preferably C60 size.
Do not use C-120 tapes
, because the design of those cartridges is often very unstable and they can get caught in
the transport mechanism.
More on Cassette Use & Care
Do not store tapes in the following places:
-
On top of heaters or where there is direct sunlight
-
High temperature locations
-
Near loudspeakers, televisions and amplifiers
-
In areas subject to strong magnetic fields
-
In areas with high humidity
-
Dirty, dusty places
Head Maintenance
-
Head and tape path should be periodically cleaned and demagnetized. Please use as a cassette-type head
cleaning tape.
-
For specific details on the proper use of the products, please read the manual of the respective product.
( 6 )
IMPORTANT PRODUCT INFORMATION
If you find your unit switches itself off regularly, this is not a fault.
Due to the ErP Stage 2 requirements for power saving measures, a unit which is connected to the mains power will
switch itself off automatically if no music has been playing for over 15 minutes.
Switch the unit OFF and after 5 seconds to ON again to re-activate it.
ErP2 – NEW EUROPEAN DIRECTIVE – FROM JANUARY 2013
The
E
nergy-
r
elated
P
roducts Directive
ErP2
impacts all energy-related products sold within the EU.
To improve energy efficiency and environmental protection, the ErP2 Directive, which is a European legislation as
part of CE marking, applies to products that affect energy consumption during use. From January 2013 this Directive
requires Manufacturers and / or Importers to offer products designed to reduce their overall impact on the
environment, including the resources consumed during use, manufacture and disposal.
D F E
C C B A
