LISTENING TO RADIO
1
Switch the unit on with the power ON-OFF Switch on the deck - then turn the Sound Volume to mid-
range position.
2
Set the function Switch (CD / USB SD / AUX-PH / TUNER / TAPE) to
TUNER
to select the Radio mode.
“
rAd
“ will show on the Display screen and the Radio Dial backlight will be on.
3
Select the desired – AM (= MW) or FM with the BAND switch.
4
Select the desired transmitted radio station by rotating the TUNING Control.
In FM mode, the Green LED on-Station Indicator in the lower half of the Frequency dial will light up if the signal
is strong enough.
5
Turn the VOLUME control to adjust the volume.
PLAYING AN AUDIO TAPE
1
Press the power switch to "ON".
2
Set the function Switch (CD / USB-SD / AUX-PH / TUNER / TAPE) to
TAPE
to select the Tape mode.
3
Insert a pre-recorded audio cassette into the slot, as can be seen in the line drawing, with the side
you want to play and the open end on the right side.
Note:
When inserting the tape, with the fully wound side of the tape going in first,
slightly tilt it to the right and press down until a click is heard.
4
Playback of the tape will automatically start. When the end of tape is reached, playback will stop.
5
Turn the volume control to adjust the volume.
6
To stop play and eject the cassette:
Press the button all
the way in until the tape is ejected.
Note:
To STOP playback, you need to EJECT the cassette.
7
To Fast forward:
Press and hold the button in during playback and release it slightly when you have found the part
you want to hear - the tape will start playing from that point.
You can push the key about 5mm to start fast forwarding the tape.
Press the button again to release it and return to the normal playback speed.
( 5 )
LISTENING TO MUSIC ON A USB FLASH DRIVE OR SD CARD
USB & SD PLAYBACK (MP3 & WMA)
1
Press the power switch to ON – set the Volume level to mid-range.
2
Set the function button (CD / USB SD / AUX-PH / TUNER / TAPE) to "
USB / SD
".
3
Insert a USB FLASH DRIVE or SD CARD (with stored music files) into the Port or SD Slot.
The LCD screen displays the number of Folders and Tracks on the Stick or Card.
–
If no USB stick or SD card files are detected, "
NO
" appears on the screen.
–
It will show the Folder [FDR] Number first.
–
It will then quickly change to the total number of songs.
4
The music should start playing automatically, flashing alternately
between the song number and the current folder number.
If it does not start playing straightaway, press the "
PLAY / PAUSE
"
button to play the music.
Turn the volume control to adjust the volume.
5
Press the "
SKIP - / SKIP +"
key once or several times, until the
desired track number appears on the display.
Playback will start automatically.
6
You can change the "
FOLDER
“ button to select the desired folder.
7
Press "
STOP
" to stop playback.
CAUTION:
Do not disconnect the USB device during USB mode, as this may damage the external device or its files.
Please power the unit off first or select another function before safely disconnecting the USB device/SD Card.
Notes:
To interrupt the music temporarily, press the "PLAY / PAUSE" button. Press the button again to resume playback.
If both a USB stick, as well as an SD card are connected, press and hold "PLAY / PAUSE" to select between USB flash drive
and SD card.
It is not guaranteed that all USB memory devices (or SD cards) will work on this audio system
The USB Port does not support connection with a USB Extension Cable and it is not designed for direct communication
with a computer.
( 10 )
