Steeper Espire Elbow Pro & Hybrid Скачать руководство пользователя страница 11

Страница: 11 / 68

Espire Elleboog Pro & Hybrid van Steeper Group, distributeur Loth Fabenim B.V.

Espire

Elbow Pro & Hybrid Instruction Manual - For Prosthetists

Batteries and Charging

2.1 The Battery

The Espire Elbow system is supplied with two removable lithium-ion batteries. This

battery supplies 3000 mAh at 11.1 volts for the elbow and 7.4 volts for the terminal

device(s). It is advised to rotate use of these batteries, keeping one as a spare for

backup power. For most users, one battery will last an entire day*, depending on

the prosthetic components, condition of the battery and the frequency of use.

The batteries are shipped with a partial-charge (up to 30%). We recommend charging

both batteries to 100% upon receipt of the Espire Elbow system.

*based on average use during an 8-hour period

Caution: Use only the Steeper Group manufactured Espire Elbow battery pack and

the provided battery charger with the Espire Pro and Hybrid systems.

Always follow the manufacturer’s instructions for proper removal of and

replacement of battery pack.

Note: To extend battery life, rotate battery usage on a weekly or monthly basis.

Note: If storing the Espire Elbow for an extended period without using, remove

battery pack from the elbow before storage.

Battery Fuel Gauge

A fuel gauge is located on the side of the battery for quickly checking the charge

status.

Содержание Espire Elbow Pro & Hybrid





































































Результаты поиска

Содержание Espire Elbow Pro & Hybrid

Отзывы:

Бренды по названию

Популярные бренды

Steeper Espire Elbow Pro & Hybrid, Инструкция по эксплуатации

Результаты поиска

Содержание Espire Elbow Pro & Hybrid

Отзывы:

Бренды по названию

Популярные бренды