SteelMax S7, Руководство оператора

Страница: 12 / 20

12
ASSEMBLY
Your SteelMax® brand saw is shipped complete and protected inside a reusable carrying case. Remove all contents from the case
and inspect to ensure no damage was incurred during shipping. Your
S
7 Metal Cutter package should also include the following:
DESCRIPTION PART # QTY
OPERATOR’S MANUAL
LIT102RGM 1
EARPLUGS (2) RGM80289 1
SAFETY GOGGLES RGM80290 1
13MM WRENCH SMS7-98 1
EDGE GUIDE SMS7-82 1
7.25” STEEL BLADE (OPTIONAL)
RGMBL07-5 1
CARRYING CASE SMS7-100 1
DISCHARGE COVER FOR WOOD SMS7-101 1
GETTING
STARTED
CAUTION!
ALWAYS DISCONNECT THE SAW FROM POWER SOURCE BEFORE MAKING ADJUSTMENTS
.
Refer to the "Functional Drawings" on page 9 and "Exploded View” drawing on page 10. If required, assemble
edge guide (item# 82) to shoe plate (item# 83), and adjust edge guide to desired position. Secure with thumb screws.
If a blade has not been installed, install an authorized saw blade as detailed in the "Changing Saw Blades" section
(page 16). Always adjust front and rear bevel lock knobs and tighten before cutting.
If wood cutting blade is installed, the accessory discharge chip cover should be used. Failure to do so could result
in an excess of sawdust in the collector, which may present a fire hazard when combined with hot metal chips.