Rail Runner
Rail Runner Operator’s Manual
17
3.6. Changing the unit of measure
To change the unit of measure between centimeters and inches, unplug the carriage
from the power source and follow the steps shown in Fig. 7.
Fig. 7.
Changing the unit of measure
When the jumper cap connects the top and center pin, the measurement system
will be metric after restart. When the jumper cap connects the center and bottom pin,
the system will be imperial.
Set the jumper cap in the position
matching to the required unit.
Use the 2.5 hex wrench (not included)
to loosen the fixing screws and access
the back side of the control panel.
inch
cm
