OSC 8
OSC 8 Operator’s Manual
6
2. SAFETY PRECAUTIONS
1. Before use
, read this Operator’s Manual and complete a training in occupational
safety and health.
2. Use only in applicati
ons specified in this Operator’s Manual.
3. Make
sure
that
the
oscillator
has all parts
and
they
are genuine and not damaged.
4. Make
sure
that the specifications of the power source are the same as those
specified on the rating plate.
5. Do not carry the oscillator by the cord. This can cause damage.
6. Keep the oscillator dry. Do not expose it to rain, snow, or frost.
7. Do not use near flammable materials, or in explosive environments.
8. Connect the power cord only after you set the switch to the middle position.
9. Install only MIG/MAG torches with the diameter of 16
–22 mm (5/8–7/8″).
10. Do not stop the oscillator by hand. To stop, set the switch to the middle position.
11. Repair only in a service center appointed by the seller.
