STEELE PRODUCTS 2200 PSI, Руководство пользователя

Страница: 11 / 22

CAUTION!
This pressure washer is intended for use only with liquid car wash detergents, developed specifically for
pressure washers and with mild soaps. Only use chemicals compatible with the aluminum and brass parts.
Powdered soaps may clog the injection system. Always use chemicals according to the manufacturers
directions. We assume no responsiblity for any damages caused by chemicals injected through this
pressure washer.
1. Attach injection tube assembly to the detergent connection on the pump.
2. Open a container of chemicals and place next to the unit near the injection tube.
3. Visually inspect strainer at the end of the injection tube to verify that it is not clogged
4. Insert the injection tube into the container all the way to the bottom.
5. Remove the high pressure nozzle from the wand and install the black injection nozzle.
The solution will automatically mix with the water and discharge through the nozzle.
NOTE: For certain models, if the engine throttle is not in the fast position, the injection of the solution may be
decreased or stopped.
CLEANING TECHNIQUES
When cleaning with the pressure washer, many cleaning tasks can be solved with water alone, but for most
tasks, it is advantageous to use a detergent. A detergeng ensures a quick soaking of the dirt allowing the
high pressure water to penetrate and remove the dirt more effectively.
APPLICATION OF SOAP OR DEGREASER
1. Apply the solution to the dry work surface. On a vertical surface, apply horizontally from side to side
starting from bottom to avoid streaking.
NOTE: Wetting the surface first is not recommended, it dilutes the detergent and reduces its cleaning effects.
Owner’s Manual
Detergent Connection
11
Detergent
Connection