10
27
2. ASSEMBLING AND REMOVING THE FRONT SWIVEL WHEELS
A
Take each front swivel wheel assembly and push it onto each of the
front legs until it clicks into place. Check that each wheel is fully
engaged and secured by pulling against it.
B
To remove each front swivel wheel assembly, Use long nose pliers
and squeeze both sides of the inner tube and pull wheel assembly
out.
10. TO USE THE STROLLER
PLEASE REFER TO PAGE 4 FOR LIFTING TECHNIQUES.
• Always ensure you bend your knees where appropriate and take
due care when lifting the frame.
• With your hand through the wrist tether strap loop, push the
stroller holding the handle.
• The stroller can be steered in the desired direction - allowing the
front wheels to swivel will make this easier.
• The front wheels may wobble or oscillate when walking fast.
Locking the front swivel wheels will stop this.
• The stroller can be taken up kerbs by either pressing down on the
handles and raising the front wheels or turning the stroller
around and pulling the stroller up the kerb.
• Caution is required when pushing the stroller on a steep slope as
the stroller may become unstable. Always hold the handles
firmly.
• Do not run with the stroller.
• Whenever you stop, always apply the brakes before you leave the
stroller.
• Do not hang bags or goods from the handle. Use the storage
basket.
